Knowledgebase
NeoLoch, LLC > NeoLoch Help Desk > Knowledgebase

Search help:


PIA and RIOT ICs not being tested properly.

Solution

There is currently a bug in the firmware version 2.01 for the PIA/RIOT that will prevent the proper testing of the IC. To rectify this, turn off "current abort" in the options. To do this:

  1. Insert the PIA/RIOT blade and turn on the unit.
  2. Press the right arrow key until you see current abort listed as the option.
  3. Press enter to change the setting to "No".
  4. Press either the left or right arrow key to store the setting in FLASH memory.

The PIA and RIOT tests should peform normally.

 
Was this article helpful? yes / no
Article details
Article ID: 12
Category: Inquisitor PIA Blade
Date added: 2017-04-23 17:15:19
Views: 36
Rating (Votes): Article rated 3.0/5.0 (2)

 
« Go back

 
Powered by Help Desk Software HESK, brought to you by SysAid