Knowledgebase
NeoLoch, LLC > NeoLoch Help Desk > Knowledgebase

Search help:


» Category: Parts  (Go back)

» Articles in this category:

 
I damaged a part while soldering it to the board, what should I do? Article rated 3.1/5.0
We really want to help you get the most out of your tester, so if you need a replacement part please contact us and we'll do our best to help you resolved the issue. For small parts like resistors, c...
Which lead on the LED is pin 1? Article rated 3.2/5.0
NeoLoch uses to types of LEDs, a two pin single color and a three lead bi-color LED. For the two pin LEDs, the shorter lead is the Cathode and the longer lead is the Anode, the shorter lead (Cathode)...
I put a LED in backwards, what can I do? Article rated 3.2/5.0
We use two types of LEDs, single color and bi-color. For the single color, two lead, LED you'll have to remove the LED and re-solder it correctly into place. For the three lead LED, you can: Remo...
I'm assembling my own power supply, which pin on the connector is positive? Article rated 3.7/5.0
Barrel Plug: The on board DC power connector requires a 2.1mm mating connector. Complete dimensions of the mating plug on the power supply we use are: 5.5mm (outside) x 2.1mm (inside) x 9.5mm (length)...
 

 
Powered by Help Desk Software HESK, brought to you by SysAid