Knowledgebase
NeoLoch, LLC > NeoLoch Help Desk > Knowledgebase

Search help:


I put a LED in backwards, what can I do?

Solution

We use two types of LEDs, single color and bi-color.

For the single color, two lead, LED you'll have to remove the LED and re-solder it correctly into place.

For the three lead LED, you can:

  • Remove the LED and install it correctly.
  • Or, if you are using a newer firmware version blade you can change a setting in the options to change the way the LED behaves.
 
Was this article helpful? yes / no
Related articles Which lead on the LED is pin 1?
PIA and RIOT ICs not being tested properly.
Why do good 4027, 4096 or UPD414 DRAM keep failing?
Orienting the ZIF socket correctly.
Article details
Article ID: 10
Category: Parts
Date added: 2016-08-20 15:16:27
Views: 104
Rating (Votes): Article rated 3.0/5.0 (10)

 
« Go back

 
Powered by Help Desk Software HESK, brought to you by SysAid