NeoLoch, LLC > NeoLoch Help Desk > Knowledgebase

Search help:

» Category: Inquisitor Core  (Go back)

» Articles in this category:

What resistors go in R10, R11, R12 and R19? Article rated 3.9/5.0
The current assembly guide doesn't have information on installing resistors R10, R11, R12 and R19. These resistors are located to the right of the voltage select jumper, there values are: R10 - 18K 1...
Orienting the ZIF socket correctly. Article rated 3.7/5.0
When inserting the ZIF socket into the PCB the lever should be located along the left side of the PCB. The ZIF will not fit correctly if inserted incorrectly, and will cover up R11.  
What type of power supply do I need for the core module? Article rated 3.6/5.0
The Inquisitor Core module requires a 12V 225ma power supply. There are two types of power supplies that you can use with the Inquisitor Core module, they are: Unregulated 12V Power Supply: To use an...

Powered by Help Desk Software HESK, brought to you by SysAid